There are many skills in QQ’s flying hand tour, such as fast turning, sideways+broken position +CWW, etc. Mastering them can make players run the whole course in a shorter time, and Xiaobian brings you a complete set of skills.
I. Introduction to Skills
1. Super start
Explanation of terms: Super-starting is a necessary skill for QQ flying hand tour, and you can surpass your opponent if you master the opening well.
How to operate: Just click a small spray at the same time after the countdown to the opening.
2, single spray
Noun explanation: single injection is the key to improve the speed when cornering.
Operation method: click on the small spray when it lights up after drifting and turning.
3. Air injection
Noun explanation: the car is triggered when it flies in the air.
Operation method: Click on the small spray when the car is flying in the air.
4, landing spray
Noun explanation: Triggered when a racing car falls from the air to the ground.
Operation method: Click on the small spray when the car falls from the air to the ground.
5, double spray
Noun explanation: Double spraying refers to single spraying again on the basis of single spraying to complete double spraying.
Operation method: when drifting over a corner, the small spray lights up when it reaches a certain arc. At this time, press the small spray and press the reverse direction key to straighten the car body, then release the right button and click the small spray.
6. WC spraying
Explanation of terms: WC spraying refers to small spraying of nitrogen after drifting and turning.
Operation method: When there is nitrogen, the small spray lights up and then click the small spray+nitrogen.
7. CW spraying
Explanation of terms: CW spray refers to nitrogen plus small spray after drifting and turning.
Operation method: When there is nitrogen, the small spray lights up when it drifts through the corner, and then click nitrogen+small spray.
8. CWW spraying
Explanation of nouns: CWW spraying is a technique often used to drift around corners.
Operation method: When there is nitrogen, point the nitrogen while drifting and cornering, and when it reaches a certain arc, the small spray lights up. At this time, press the reverse direction key while pressing the small spray to straighten the car body, and then release the reverse direction key and point the small spray.
9, WCW spray
Explanation of nouns: WCW spraying is also a technique often used to drift around corners.
Operation method: when there is nitrogen, it drifts over the bend and reaches a certain arc, and the small spray lights up. At this time, press the small spray while pressing the nitrogen, and at the same time press the reverse direction key to straighten the car body, then release the reverse direction key and click the small spray.
Second, the intermediate level of skills
1. Double-injection in section position
Noun explanation: breaking the drift when the drift turns a corner makes the front of the car pull straight quickly and reduces the drift time.
Operation method: Double-click the drift key to make the front of the car straighten quickly before drifting out of the corner, and hold it down for the second time. At this time, press the reverse direction key to straighten the car body while pressing the small spray, and then release the reverse direction key and click the small spray.
2, tail flick double spray
Noun explanation: Suitable for bends less than 90 degrees, which can quickly turn corners and reduce the turning time.
Operation method: When there is nitrogen, press the drift key in the outer lane just before the curve, and then press the downward direction key (turn left, turn right, turn right) under point 2 at a constant speed until the small spray lights up at a certain arc. At this time, press the reverse direction key while pressing the small spray to straighten the car body, and then release the reverse direction key and click the small spray.
3, fast bend
Noun explanation: bend directly after turning, reducing the turning time (but CWW or WCW cannot be used)
Operation method: Double-click the drift key to make the front of the car straighten quickly before drifting out of the corner, and hold it down for the second time. At this time, press the small spray+nitrogen or nitrogen+small spray.
4. Stagnation and drift
Noun explanation: used when it is found that it is going to hit the front of the curve when turning, so as to reduce the collision.
Operation method: When you feel that you can’t cross the curve due to drifting, press the brake key and stop for a certain distance, then release it.
5, sideways drift
Noun explanation: used when there is a bend of about 30 degrees in front of the U-bend, which makes it impossible to drift directly through the bend.
Operation method: When there is a bend of about 30 degrees in front of the U-bend, so it is impossible to drift directly, press the left direction key and slide to the right direction key, then press the drift key (suitable for turning right, please press the direction key backwards for turning left).
Third, advanced skills (because of the explanation of nouns mentioned earlier, I will not explain them here)
1. Segment +CWW or WCW
Operation method: CWW: Double-click the drift key before coming out of the corner when drifting, and hold it down for the second time. At this time, after releasing nitrogen, press the small spray and press the reverse direction key to straighten the car body, then release the reverse direction key and click the small spray.
Operation method: WCW: Double-click the drift key before coming out of the corner when drifting, and hold it down for the second time. At this time, press the reverse direction key to straighten the car body while pressing the small spray, and then release the nitrogen, then release the reverse direction key and click the small spray.
2, sideways+segment +CWW or WCW
Operation method: CWW: When there is a bend of about 30 degrees in front of U-bend, so it is impossible to drift directly, press the left direction key and slide it to the right direction key, then press the drift key (suitable for turning right, please press the direction key backwards for turning left), and then click the drift key again before entering the bend to form a normal drift bend. Please see the segment position +CWW or WCW above for the connection position.
Operation method: WCW: The method is the same as above (WCW and CWW are used in the same way except for the use time of small spray and nitrogen)
3. Tail flick+segment position +CWW or WCW
Operation method: CWW: Before approaching the corner with nitrogen, press the drift key in the outer lane, then press the down arrow key (turn left, turn right) at a constant speed, and double-click the drift key when it reaches a certain arc. Press and hold it for the second time, and then the small spray will light up. At this time, press the reverse direction key while pressing the small spray to straighten the car body, and then release the reverse direction key to click the small spray.
Operation method: WCW: The method is the same as above (WCW and CWW are used in the same way except for the use time of small spray and nitrogen)
4, sideways+stagnation+segment +CWW or WCW
Operation method: CWW: add stagnation drift (not measured personally) between sideways and segment positions.
Operation method: WCW: The method is the same as above (WCW and CWW are used in the same way except for the use time of small spray and nitrogen)
5. Tail flick+stagnation+segment position +CWW or WCW
Operation method: CWW: add stagnation drift (not measured personally) between tail flick and segment position.
Operation method: WCW: The method is the same as above (WCW and CWW are used in the same way except for the use time of small spray and nitrogen)
关于作者